Granite expo online3/19/2024 To remove deep or stubborn oil stains not completely removed by KlenzAll™, let the surface dry and use StoneTech Professional™ Oil Stain Remover.Repeat the rinsing and wet vacuum process to insure that all dirt, soil and cleaner residue have been removed.Agitate well using a stiff nylon bristle scrub brush, stiff bristle push broom or a weighted floor machine at 130 lbs.-140 lbs., 175 rpm, fitted with a scrub brush attachment.Apply KlenzAll™ using a low-pressure chemical-resistant sprayer, sponge or mop.– Heavy Duty Usage - Mix 1 part KlenzAll™ to 2 parts of water. – Medium Duty Usage - Mix 1 part KlenzAll™ to 4 parts of water. Prepare a solution of StoneTech Professional™ KlenzAll™ mixed with warm or hot water as suggested below:.Strip off all topcal finishes such as waxes and coatings.Repeat the rinsing and wet vacuum process to ensure that all dirt, soil and cleaner residue have been removed.– A hard surface extraction wand and portable or truck mounted extraction machine may be used. Rinse well with clean water and mop, sponge or wet vacuum to remove the remaining cleaning solution.Agitate well using a stiff nylon bristle scrub brush, stiff bristle push broom or a weighted floor machine at 130-140 lbs., 175 rpm, fitted with a scrub brush attachment. Heavy Duty Coating Stripper will remain active for up to 24 hours. Allow stripper to dwell for 20 minutes to 2 hours or as long as needed to soften coating.Apply an even coat using a chemical-resistant paintbrush, roller or deck brush.– For softer coatings, dilute Heavy Duty Coating Stripper with clean water up to a 1 to 1 solution. – For heavy, hard to remove coatings, use StoneTech Professional™ Heavy Duty Coating Stripper as is. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.Sweep or dust mop loose dirt and debris.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |